JVC GR-AX860 Instructions Manual page 41

Compact vhs camcorder
Hide thumbs Also See for GR-AX860:
Table of Contents

Advertisement

ORIGINAL TAPE (camcorder)
1
3
IN
OUT
IN OUT
EDITED TAPE (VCR)
EDIT
SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL
Player (JVC VCR)
To
Editing cable
R.A.EDIT
(3.5 ø -3.5 ø,
provided)
Recording deck
To
PAUSE IN
RM-V706U
(provided)
AUTOMATIC EDITING TO VCR
ENGAGE VCR'S RECORD–PAUSE
2
IN
OUT
MODE
1
Point the remote control toward the VCR's infrared
sensor and press VCR REC STBY, or manually
engage the VCR's Record-Pause mode.
BEGIN AUTOMATIC EDITING
2
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
STOP
specified order.
END AUTOMATIC EDITING
3
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
If you performed step 1
("MAKE CONNECTIONS"), keep the remote control
pointed at the VCR during editing.
The on-screen display only appears while the
camcorder searches for each scene.
There may be noise at in- or out-points on the edited
tape with certain VCRs.
Using the RM-V706U remote control, it is also possible to
perform deck-to-deck Random Assemble Editing. The
AV OUT
playback deck must be an R.A. Edit-capable JVC VCR. The
recording deck can be...
a VCR other than JVC, or
a JVC VCR which has neither a Remote PAUSE nor an R.A. EDIT
connector
How to use:
AV IN
— Connect the playback deck and RM-V706U as shown on the
left.
— Set the RM-V706U to correspond to the brand of the recording
deck. (
P. 39)
— For Random Assemble Editing procedure, please refer to the
instruction manual of the JVC VCR you are using as the
playback deck.
Notes:
RM-V706U cannot be used to control the playback deck.
RM-V706U is capable of controling basic operations of the
recording deck. While pressing VCR CTL, press PLAY, STOP,
PAUSE, FF or REW for these functions. (Not possible with some
brands and models). Other buttons cannot be used.
To put the recording deck in the Record-Pause mode, use the
controls on the recording deck itself.
41
on page 39
C

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr-ax860egGr-ax860ek

Table of Contents