DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
or "
" and "DEMO MODE" is set to "ON" (factory-
preset). Performing any operation during the
demonstration stops the demonstration temporar-
ily. Set to OFF to stop completely.
• When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic Demon-
stration activated on the viewfinder.
DATE/TIME
Allows you to set the current date and time.
(
pg. 7)
!
is set to "
"
22