Installing The Batteries - JVC GR-AX761 Instructions Manual

36
USING THE REMOTE CONTROL UNIT (GR-AX761 only)
EN
3
3
Remote sensor
1
1
2
2
Transmitted beam
effective area
5m (16 ft)

Installing The Batteries

The remote control uses two "AAA (R03)" size
batteries. See "General Battery Precautions"
( pg. 48).
1
Open the battery compartment cover as
illustrated.
2
Insert two "AAA (R03)" size batteries in the
correct direction.
3
Replace the battery compartment cover.
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
(cont.)