JVC GR-AX761 Instructions Manual page 17

Quick Review (2) Button
Set to " " or "
RETAKE (2/3) Button
Set to " " or "
5 SEC. REC
Button
Set to " " or "
Quick Review:
recording.
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press 2 and release quickly.
Tape is rewound for approx. 2 seconds and played
back automatically, then pauses in Record–Standby
mode for the next shot.
Distortion may occur at the start of playback. This is
normal.
".
Retake:
To re-record certain segments.
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press and hold either RETAKE to reach the start point for
new recording. Pressing 3 forwards the tape and
pressing 2 reverses it.
3) Press the Recording Start/Stop Button to start recording.
Noise bars appear and pictures may become mono-
chrome or darken during Retake. This is normal.
".
5Sec. Rec (5-Sec. Recording):
To record a scene for 5 seconds, providing quick scene
transitions like those seen in TV programs.
1) Make sure the recording mode is set to "SP".
2) During Record–Standby, press 5 SEC. REC. "
appears and 5Sec. Rec is reserved.
3) Press the Recording Start/Stop Button. Recording starts,
and after 5-second recording is finished, the camcorder
".
reenters the Record–Standby mode automatically.
4) To cancel the 5Sec. Rec. function, press 5 SEC. REC
again so that "
Fade/Wipe (
5 SEC. REC.
To check the end of the last
5S" disappears.
pg. 19) cannot be activated by pressing
17
EN
5S"