Carburetor And Reed Valve - Yamaha YZ250N Owner's Service Manual

EC460000

CARBURETOR AND REED VALVE

Extent of removal:
Extent of removal
Preparation for
removal
1
2
CARBURETOR AND REED VALVE
1 Carburetor removal
Order Part name
CARBURETOR AND
REED VALVE REMOVAL
Fuel tank
1 Solenoid valve lead
2 TPS (throttle position sensor)
lead
3 Clamp (carburetor joint)
4 Carburetor
5 Carburetor joint
6 Reed valve assembly
7 Stopper (reed valve)
8 Reed valve
10 Nm (1.0 m•kg, 7.2 ft•lb)
1 Nm (0.1 m•kg, 0.7 ft•lb)
2 Reed valve removal
Q'ty
1
1
2
1
1
1
2
2
4-7
ENG
Remarks
Refer to "SEAT, FUEL TANK AND
SIDE COVERS" section.
Disconnect the solenoid valve lead.
Disconnect the TPS
(throttle position sensor) lead.
Loosen the screws (carburetor joint).