Removing The Carburetor And Reed Valve - Yamaha yz250 2015 Owner's Manual

CARBURETOR AND REED VALVE

REMOVING THE CARBURETOR AND REED VALVE

Order
Fuel tank
1 Solenoid valve lead
2 Throttle position sensor lead
3 Clamp (carburetor joint)
4 Carburetor
5 Carburetor joint
6 Reed valve assembly
7 Stopper (reed valve)
8 Reed valve
9 Plate (reed valve)
CARBURETOR AND REED VALVE
Part name
4-7
10 Nm (1.0 m kg, 7.2 ft lb)
1 Nm (0.1 m kg, 0.7 ft lb)
Q'ty
Refer to "SEAT, FUEL TANK AND SIDE
COVERS" section.
1 Disconnect the solenoid valve lead.
1 Disconnect the throttle position sensor lead.
2 Loosen the screw (carburetor joint).
1
1
1
2
2
1
Remarks