High-Speed Continuous Shooting; High-Speed Burst - Canon PowerShot S200 User Manual

2
Compose the shot and press
the shutter button halfway.
z z
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the
way down.
z z
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
z z
The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the
shooting area and look at the
camera.
z z
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
z z
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
•
Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
•
To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 46) is only available for the final shot.

High-Speed Continuous Shooting

(High-Speed Burst)

You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
"Continuous Shooting Speed" (= 177).
1
Choose [ ].
z z Follow steps 1 – 2 in "Specific Scenes"
(=
2
Shoot.
z z
Hold the shutter button all the way down
to shoot continuously.
•
The resolution is [ ] (1824 x 1368) and cannot be changed.
• Focus, image brightness, and color are determined by the first shot.
•
Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions, camera settings, and the zoom position.
•
As more shots are taken, shooting may slow down.
Images Displayed during Playback
Each set of images shot continuously is managed as a single group, and
only the first image in that group will be displayed. To indicate that the
image is part of a group, [ ] is displayed in the upper left of the screen.
•
If you erase a grouped image
also erased. Be careful when erasing images.
Still Images
50) and choose [ ].
(= 97), all images in the group are
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
59