Move Cursor - Symbol LS4208 Reference Manual

Setup Field(s) Definitions (Continued)
Table 14-2
Parameter
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value

Move Cursor

Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning
a bar code from the Alphanumeric Keyboard on page
NOTE If there is no match when the rule is interpreted and the rule fails, the next rule is checked.
Move Cursor To Character
Move Cursor Past Character
Description
Scan one of these bar codes to select the desired number of
positions to move the cursor ahead.
Scan one of these bar codes to select the desired number of
positions to move the cursor back.
Send prefix and/or suffix value by scanning the appropriate bar
code. These values must be set using the Scan Prefix and
Scan Suffix bar codes on page
14-83.
Move Cursor Past Specific String
Advanced Data Formatting 14 - 27
13-4.
Move Cursor To Start
Page
14-29
14-31
14-32