Other Specifications - Sony XM-1600GSD Operation Instructions Manual

Specifications
AUDIO POWER SPECIFlCATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
300 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.
Other Specifications
Circuit
systein
OTL (output transformerless)
circuit
Pulse power suppl>
111y11ts
RCA pin jacks
High level input connector
outputs
Speaker terminals
Through
out pin
jacks
Speaker impedance
l-8R
Maximum outputs 600
W (at 4 Q)
1200 w (at 2 n)
Rated outputs (supply
voltage at
14.4 V)
300 W (20 HT - 300 Hz. 0.2 '%I
THD, at 4 Q)
600 W (20 Hz - 300 Hz, 0.6 "i,
THD, at 2 Q)
1000 W (20 Hz -- 300 Hz, 1.2 "4
THD, at 1 12)
Frequency response
5 Hz - 3110 Hz ("YdB)
Input level adjustment range
0.2 - 6.0 V (RCA pin jacks)
0,4 - 12.0 V (High level input)
Lowpass filter
50 - 300 Hz, -12 dB/oct
Low boost 0 - 10 dB (40 Hz)
Power supply voltage
10.5-16V
Current drain
at rated output: 40 A (at 4 R)
Remote input: 2 mA
Dimensions
Approx. 14 '/XX 2 x 10 l/z in.
(358 x 50 x 264 mm) (w/h/d) not
incl. projecting parts and controls
Mass
Approx. 3.5 kg (7 lb. 11 oz.) not
incl. accessories
Supplied accessories
Mounting screws (4)
Design and specifications are subject to change
without notice.
Harmonic