System Connection - Telefunken Twin 7 User Manual

System Connection

Powering and installation
Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the
machine, then plug the other end into the AC power receptacle. Please refer to the
following illustration
If using car cigarette lighter adaptor to connect to the power:
Plug one end of the cigarette lighter adaptor into the DC IN 9-12V jack on the unit, plug
the other end into the car cigarette lighter socket. See illustration below.
Notice:
1.Car cigarette lighter adaptor can't be used to recharge the battery.
2.Car cigarette lighter adaptor is available to use only when the carpower supply is 9-12V.
DC IN 9-12V
AV OUT DC OUT
DC IN 9-12V
AV OUT DC OUT
4
Connecting to the monitor
The unit can also be connected to the external LCD monitor.
Connect the unit to power by AC/DC adapter or cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor
by a DC/AVcable. Also use this DC/AV cable to connect the AV OUT jack of
the unit to AV IN jack of the Monitor.
Please refer to the illustration below.
DC IN 9-12V
AV OUT DC OUT
Note: You're advised to supply both units the power by the cigarette lighter adapter
only. The AC/DC adapter is used to supply power of one unit only and as the charger
to charge the main unit if it's with built-in battery.
ON/OFF
5