Power - JVC GR D 240 Instructions Manual

GR-D240PAL.book Page 11 Wednesday, November 17, 2004 7:32 PM
How To Attach The Shoulder Strap
Follow the illustration.
1
Thread the strap through the eyelet.
2
Fold it back and thread it through the strap
guide and the buckle.
To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
3
Slide the strap guide fully towards the eyelet.
Buckle
Strap guide
2
1
Eyelet

Power

This camcorder's 2-way power supply system
lets you choose the most appropriate source of
power. Do not use provided power supply units
with other equipment.
Charging The Battery Pack
2
3
Open the cover.
AC Adapter (ex. AP-V17E
1
Set the Power Switch to "OFF".
2
With the arrow on the battery pack pointing
downward, push the battery pack slightly against
the battery pack mount a.
3
Slide down the battery pack until it locks in
place b.
4
Connect the AC Adapter to the camcorder.
5
Connect the Power Cord to the AC Adapter.
(AP-V14E only)
6
Plug the AC Adapter into an AC outlet. The
POWER/CHARGE lamp on the camcorder
blinks to indicate charging has started.
7
When the POWER/CHARGE lamp goes out,
charging is finished. Unplug the AC Adapter
from the AC outlet. Disconnect the AC Adapter
from the camcorder.
MasterPage: Start_Right
GETTING STARTED
Power switch
M A OFF PLAY POWER/CHARGE lamp
POWER/
CHARGE
Battery pack mount
PUSH BATT.
Battery pack
Arrow
mark
To DC connector
To AC outlet
)
CONTINUED ON NEXT PAGE
11
EN