Warning Indications (Continued)
62
EN
Indication
RECORDING FAILURE
RECORDING MAY NOT BE
CORRECT ON THE MEMORY
CARD
MEMORY CARD CANNOT BE
PLAYED BACK CORRECTLY
CANNOT USE IN VIDEO MODE
DROP DETECTION WORKED
AND THE POWER IS TURNED
OFF
Cleaning the Camera
Before cleaning, turn off the camera and remove the battery pack and AC adapter.
To clean the exterior
Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild soap
and wring it out well before wiping. Then wipe again with a dry cloth.
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the monitor.
To clean the lens
Wipe gently with lens cleaning paper.
NOTES:
Avoid using strong cleaning agents such as benzine or alcohol.
Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.
Mould may form if the lens is left dirty.
When using a cleaner or chemically treated cloth, refer to the cautions for each product.
Performance of recording medium is poor. Use the
Cleanup function [CLEAN UP] in the menu.
The writing speed of recording medium is slow, or the
recording medium is corrupted. Use an SD card that is
guaranteed to operate.
The recording medium was subjected to vibrations or jolts.
Be careful not to subject the recording medium to
vibrations or jolts.
Appears when the built-in hard disk is full and recording is
not possible. Delete unnecessary files.
Appears when the SD card is full and recording is not
possible.
Replace with new recording medium or delete
unnecessary files.
The data may not be recorded on the recording medium
correctly. Try recording again.
Otherwise, clean up the recording medium.
The recording medium cannot be played back correctly. Try
playback again.
The operation is not available in the video mode.
The drop detection function operated, and the power was
turned off. The file that was being recorded may have been
saved into the [EXTMOV] folder.
Meaning
40
3
15
–
36
36
–
40
–
–
29
51