Video Setup; Dvd Setup; Disc Audio; Video Setting - Boss Audio Systems BV9355B User Manual

DVD Operations
5
FUNCTION MENU
Tap button access into the Function
Menu, and there are have below options for
selection:
Repeat
Repeat "CH" to repeat playback the
current the chapter.
Repeat "Title" to repeat playback
current title.
Repeat " Off " to cancel all the Repeat
function.

Disc Audio

During playback to change the audio
language (DVD/Divx only).

Video Setting

Top
Video Setting mode, the below Setup menu
will appear:
the
button access into the
Change the Bright
level from 01 to 10.
Change the Contrast
level from 01 to 10.
Change the Color
level from 01 to 10.
Reset to default
setting
Close the Setting
menu

DVD Setup

Under the DVD Setup mode, there are have
below options for selection:
Aspect Ratio: Selecting the TV Aspect
setting allows the user to select the aspect
ratio of the TV (DVD and VCD only). The
following options are available:
4:3 = Aspect ratio of TV is 4:3.
16:9=Aspect ratio of TV is 16:9. Both wide
screen and 4:3 contents will fill the
entire screen.
TV Signal: The Video setting allows the
user to select the TV standard (DVD and
VCD only). The following options are
available:
NTSC = TV is NTSC. PAL content is played at
NTSC resolution and frame rate
(factory default).
PAL = TV is PAL. NTSC content is played at
PAL resolution and rame rate.
AUTO = If the content is PAL, the output is PAL.
If the content is NTSC, the output is
NTSC.
Default
Setting the Default on will reset all options of
Media function setting to factory defaults
setting.
6
INFORMATION
Tap button to view the Disc information
of the unit.
7

VIDEO SETUP

Tap
video setup mode.
E 1 - 9
button to quickly enter into the