Roller-Resist - Oki B410 Maintenance Manual

Oki Data CONFIDENTIAL

3.3.20 Roller-Resist

(1) Open Rear-Cover-Assy.
(2) Open Stacker-Cover-Assy.
(3) Remove Frame-Assy-Lower. (Refer to 3.3.16)
(4) Remove Plate-Bracket-Motor. (Refer to 3.3.18)
(5) Remove the E ring ① . Remove the Gear-Assy-Clutch ❷ , Spacer-Clutch ③ and Bearing-R ❹ .
(6) Remove the lock of Gear-Resist ⑤ . Remove Gear-Resist ⑤ , Bearing-Resist-Assy ❻．
(7) Lift up the left side of Roller-Resist-Assy ⑦ and remove it at the arrow direction.
(8) Remove the lock of Gear-Pressure ⑧ . Remove Gear-Pressure ⑧ from Roller-Pressure ⑨．
(9) Remove Plate-Contact-PA ⑪ and Holder-Resist from Roller-Resist ❿ .
Remove Holder-Resist ⑬ .
(10) Installing is performed by the inverse procedure with removing.
(Note on removing / installing)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
43984801TH Rev.1
3. Parts replacement
59 /