Finger Printer Information Clear; System Information - Toshiba Satellite A215 Maintenance Manual

3.2 Quick Start
NOTE: Because, execution of this test vanishes all fingerprint data. When you perform this
test, please make it only failure of a fingerprint sensor.

3.2.11 Finger Printer Information Clear

Select this item to clear all the information in the FP Device.

3.2.12 System Information

This function is used to read the system information. When the test is completed, a file
named System.log will be saved in the defined location. During the reading process, the
following screen will be displayed to indicate that the progress is in detection:
On the left column of the above screen, the detected hardware components are listed. The
corresponding information of the detected hardware components is displayed on the right
of the screen. It displays the current running status information of the check program.
The name of the program is marked on the top of the screen. At the bottom, the function
keys are listed for user operation. During the detection, keyboard operation is invalid.
When the detection is finished, the hardware components information will be displayed
as follows:
NOTE: The data display of video is 1024x768.Probably this is the problem of VESA mode.
Satellite A210/A215,Satellite Pro A210, EQUIUM A210,SATEGO A210 Maintenance Manual
3 Diagnostic Programs
11