D-Link DCS-930L Setup Manual page 2

For this setup guide we will be using the DCS-942L to illustrate how you can record using
the D-Link D-ViewCam software application.
This document can be applied to all of the mydlink camera range, thus far it applies to
DCS-930L / DCS-932L and DCS-942L.
D-Link D-ViewCam Installation:
1. The D-ViewCam software is provided on the Installation CD-ROM. Insert the Installation
CD-ROM into your optical drive and allow it to autorun and or browse your optical drive
and double click on the 'autorun.exe' file. Allow it to run if asked for permission.
2. Click on the D-ViewCam (DCS-100) menu:
NOTE: Any prompts that require permission please click on 'Run', 'OK', 'Accept' and or
'Continue'.
D-Link Technical Support – How to record using mydlink camera's. Page 2 of 17