Low Ambient Kit; Status Panels Sp11 And Ssp11; Low Ambient Kit Typical Installation - Lennox CHA16 Service Manual

NOTE-
See CAUTION.
Compressor monitor (Low Ambient Lockout Switch)
S3 cannot be used with optional low ambient kit.Com
pressor monitor MUST be disconnected before allow
ing low ambient kit to be used.
Electrical shock hazard. Low ambient kit wiring
changes depending on unit size. Depending on the
application, low ambient controls may be wired to low
voltage or line voltage. Be sure to disconnect power
to unit before servicing. Then check unit wiring dia
gram and become familiar with low ambient wiring be
fore proceeding.
Page 48