Presentation - TANDBERG MXP series Short User Manual

Presentation

The Presentation functionality enables you to show PC, DocCam (Document Camera), VCR,
AUX and VNC sources in addition to your Main Camera. This is perfect for meetings where
you would like to show a PowerPoint presentation for instance. You can even use arrow keys
up and down on the remote control to activate Page Up/Down on the PC. (This only applies
when using VNC).
Use Presentation outside a call to make a local presentation for the people in your own
meeting room. Use Presentation when you are in a call to make a presentation for the far end
as well.
The quickest way to show a presentation is to use the presentation key on the remote control.
The presentation key shows a predefined video source, PC is default. It is possible to change
the presentation source in Administrator Settings - Presentations Settings.
Choose Presentation from the main menu if you want to select a video source manually. The
Presentation menu offers you all available video sources: Main Camera, PC, DocCam, VCR,
AUX and VNC.
Live PC images
When showing a presentation from your laptop PC, remember to
connect your PC to the video system with a VGA cable. Make sure
that your PC transmits the image to the VGA Output. On most
laptop PCs you must press a special key combination to switch the
image.
Note: The image will appear smoother on the system if your
presentation is already displaying in full screen on your PC prior to
connecting your PC to the video system.
TANDBERG Short User manual - 9
VGA Cable