Replacing The High-Mount Brake Lamp Bulbs; Replacing Approach Lamp/Mirror Turn Signal Bulbs; To Change The High-Mount Brake Lamp Bulbs - Lincoln NAVIGATOR 2015 Owner's Manual

Replacing the High-Mount Brake Lamp Bulbs

8. Install the lamp assembly with two screws.

Replacing Approach Lamp/Mirror Turn Signal Bulbs

For bulb replacement, see your authorized dealer.
Maintenance
To change the high-mount brake
lamp bulbs:
1. Remove the two screws holding
the lamp assembly in place.
2. Pull the lamp assembly straight
out.
3. Disconnect the wire harness.
4. Press the four tabs that hold the
light assembly on, one at a time,
and pull the black bulb carrier away
from the lamp.
5. Pull the old bulb out and replace
with the new bulb.
6. Snap the black bulb carrier into
the lamp assembly.
7. Connect the wire harness.
279