Editing An Existing Entry - Raymarine Ray55E Owner's Handbook Manual

80
5. When you press the CH/OK knob to accept the final MSSI ID digit, the cursor
moves on to the NAME field. The first character in this line is a symbol
assigned by the radio, based on the MMSI number you entered.
Coast Stations are identified by "00" at the beginning of the station name. If
you enter 00 as the leading digits of the MMSI ID, the radio recognizes this as
a coast station and automatically enters a tower symbol (&). If you enter a
number other than 0 in the initial position of the MMSI ID, an anchor symbol
($) is entered as a prefix to the name, identifying this as a Ship Station.
The first character space to be modified is highlighted with a flashing under-
line. Using the same procedure as above, rotate the CH/OK knob to select
the NAME characters. All alpha and numeric characters are available, as well
as 13 symbols: ! # % ' ( ) : ? / . , + -
Press the CH/OK knob to accept. Continue this process until all NAME char-
acters have been entered.
Press OK
.
..
.
SHIP/SHIP
6. When complete, press the DONE soft key to accept.
The new entry appears in the list.
Press OK
.
.
.
SHIP/SHIP

Editing an Existing Entry

1. From the Phonebook, rotate the CH/OK knob or press the [ and ] soft keys
until the entry you wish to edit is highlighted.
2. Press SELECT. The list of options appear.
3. Highlight EDIT and press SELECT.
4. Make your changes to the NAME and MMSI ID, using the CH/OK knob.
5. When finished, DONE to save your changes. The revised name or MMSI
number appears in the list.
72
PHONEBOOK
NEW ENTRY
ENTER MMSI:
36123456
ENTER NAME:
B B
$_----------
BACK
72 PHONEBOOK
ENTER MMSI:
366123456
ENTER NAME:
B B
$TOTL MADNES
PRESS DONE
DONE
Ray218E and Ray55E Marine VHF Radios
Select Characters
.
..
.
SHIP/SHIP
72
PHONEBOOK
<NEW>
$TOTL MADNES
.
.
[BACK]
.
B B
SHIP/SHIP
SELECT
72
PHONEBOOK
NEW ENTRY
ENTER MMSI:
36123456
ENTER NAME:
B B
$TOTL MADNES
BACK
D9252-2