10
If the Flash key does not work
The requirements for the operation of the Flash key vary between PBXs and
from country to country. Konftel 200 therefore lets you program the Flash
time so that it works with most PBXs on the market.
Programming the Flash key
Flash time
600
Calling
Press Menu.
Select Special Settings menu.
Press OK.
Choose Flash time.
Press OK.
Enter the value for the Flash key (R-pulse). The
default setting is 5. Check in the table below
whether the setting is right for your PBX/
country.
Time:
50 ms
100 ms
150 ms
250 ms
600 ms
Press the OK key to save the settings and exit.
Konftel 200 • User Guide
(default setting = 600)
PBX/country:
Ericsson MD110
Scandinavia, Europe
Reserved
Germany, France, Israel
USA