Adjusting Ring Level Volume; Adjusting The Flash/R Pulse Duration; Selecting Caller Id Standard - Konftel 250 User Manual

aDJUsTinG RinG leVel VolUMe


Select MenU > seTTinGs > RinG leVel.

Select your choice and press oK to confirm.
There are six volume levels plus a silent mode. You will hear the ring tone for each

level you select. If you select silent mode, an LED on the phone flashes when an
incoming call is received.

aDJUsTinG THe flasH/R PUlse DURaTion

The Flash/R pulse (Register recall) is used to request a new line from the PBX. Different
countries and PBXs may require different durations for activating the Flash/R pulse.
Duration requirements should be specified in the technical data for the PBXs.
 Select MenU > seTTinGs > flasH.

Select your choice and press oK to confirm.
Examples of suitable settings are:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA

selecTinG calleR iD sTanDaRD

Konftel 250 needs to be configured to match the Caller ID standard in your country.
Note that in some cases even individual states/provinces within a country use different
standards. The table below is a guideline for choosing the correct setting. If the caller
ID is not working properly, select another setting or contact your telephone service
provider for further information.
Caller ID standard
Bellcore (Telcordia)
ETSI
BT (British Telecom)
DTMF
 Select MenU > seTTinGs > calleR iD.

Select your choice and press oK to confirm.
Country
Canada (usually), USA, Australia, New Zealand,
China, Hong Kong, Singapore
Austria, Belgium, Czech Republic, France, Germany, Italy,
Luxemburg, Norway, Poland, Spain, Slovenia, Switzerland,
Turkey, South Africa, Taiwan
United Kingdom
Denmark, Finland, Greece, Iceland, Netherlands, Portugal,
Sweden, China, India, Saudi Arabia, Brazil, Uruguay
seTTinGs
19