Accessories; Universal Tray, Anti-Splash Insert; Rack, Runners; Oven Interior - Miele H 4402 B Operating And Installation Instructions

Accessories

Universal tray, anti-splash insert

The surface has been treated with
PerfectClean.
Please refer to the section on
"PerfectClean" for information on
cleaning and care.

Rack, runners

Use warm water and washing-up liquid
or non-abrasive stainless steel cleaning
agents.

Oven interior

Danger of burning.
Allow the oven to cool down before
cleaning by hand.
It is best to clean the oven interior
each time the oven is used. If this is
not done, subsequent soiling from
baking and roasting will become
worse and make cleaning harder.
In extreme cases this can cause
damage to the surface material.
The oven interior has been treated
with a special type of enamelling called
PerfectClean.
Please refer to the section on
"PerfectClean" for information on
cleaning and care.
Cleaning and care
The removable back panel is coated
with a dark grey catalytic enamel.
See "Cleaning and care" for information
on cleaning catalytic enamelled panels.
To make cleaning easier,
– remove the oven door,
– dismantle the door,
– take out the side runners,
– remove the catalytic back panel,
– lower the top heating/grill element.
Instructions for doing so are given
further on in this section.

Seal and inside of the oven door

Grease desposits on the seal between
the inside of the oven door and the
oven interior can cause it to become
brittle and cracked.
It is best to clean the seal and the
inside of the door after each
programme with a cloth or a clean
sponge and a solution of hot water with
a little washing up liquid. Wipe dry
using a soft cloth.
For cleaning, you can also use a clean,
damp microfibre cloth without any
cleaning agent.
37