Indicator Of Program Sequence - Bosch WTE86300US Operating, Care And Installation Instructions Manual

Start Delay
Sets the delay start time of the dryer
(Start in .. hours!) 0-24 h
(0.5 h steps)
The selected time is displayed.
Operation with Start Delay
First select a program and then the
start delay by pressing the button.
Press the Start/stop button and
after the run down of the delay start
time the drying program starts.
Indicator of program
sequence
The dryer uses an electronic
scanning system for all programs
except the time programs and the
special Wool Finish" program.
A moisture sensor continuously
checks the moisture in the laundry.
Drying ends automatically as soon
as the selected degree of dryness
has been reached.
The drum continues to rotate at
specific intervals for one hour to
prevent creasing.
The current state of the process
and the level reached during the
program sequence is indicated
via indicator lights (drying, damp
dry, regular dry, Wrinkle block/
End).
i
If the indicator light Wrinkle
block/End" illuminates when
the program selector is in
Off Position - turn off the
circuit breaker and call for
customer service!
17