Restoring Factory Settings For Beverage Buttons; Economy Modes; Economy Mode - Jura Capresso Impressa 68193 Operating Instructions And Warranty

Fully automatic coffee & espresso center with clearyl water care system
Table of Contents

Advertisement

9. Turn the Rotary Dial until the display shows
10. Push the dial,
MILK 14
display shows
MILK 20
11. Push the Rotary Dial to confirm:
MILK 20
SEC.
12. Push the Rotary Dial until the display shows
13. Push the Rotary Dial,
PAUSE 15
Dial until the display shows
14. Push the Rotary Dial to confirm:
PAUSE 10
SEC.
15. Turn the Rotary Dial until the display shows
the dial.
SELECT
PRODUCT.
16. If you do not want to change another button, turn the dial
until the display shows
EXIT
COFFEE
READY.
Example 3:
Change the Hot Water Portion to 7 ounces and and leave the
temperature at XHIGH.
COFFEE READY
1. Push the Rotary Dial until the display shows MAINTENANCE.
2. Turn the Rotary Dial to
PRODUCTS
Dial. The display shows
3. Turn the Selector Dial (Fig. 3.3) on the right side until the
symbol for the Hot Water Portion is illuminated (Fig. 3.1).
Then push the Selector Dial.
4. Display shows the current water portion, e.g.
5. Push the Rotary Dial,
WATER 5
the display shows
WATER 7
MILK 14 SEC
SEC, and turn the dial until the
SEC.

CONFIRMED
then
PAUSE 15
SEC, and turn the Rotary
PAUSE 10
SEC.

CONFIRMED
then
EXIT
and push
and push the Rotary Dial:
and push the Rotary
SELECT
PRODUCT.
WATER 5
OZ, and turn the dial until
OZ.
6. Push the Rotary Dial to confirm:
WATER 7
OZ.
7. Turn the Rotary Dial until the display shows
the dial.
SELECT
8. If you do not want to change another button, turn the dial
SEC.
until the display shows
COFFEE
READY.
14.2 RESTORING FACTORY SETTINGS FOR BEVERAGE
BUTTONS
You can reset the beverage buttons back to the factory setting
as follows:
The machine is plugged in. Only the main power switch in the
back of the machine is on. The display is blank.
Example: reset the 1-CUP Espresso button.
• Open the cover of the Rotary Dial.
• Push and hold the Rotary Dial and push the 1-Cup Espresso
button for two seconds. The display shows
The factory setting has been restored.

14.3 ECONOMY MODES

You can set the machine to three different modes.
ECONOMY MODE – (SAVE
The S9 OT is always ready to brew coffee and produce steam.
The two white indicator lights in the cappuccino and latte
macchiato button are always on.
ECONOMY MODE 1 (SAVE LEVEL
OZ.
The machine is always ready to brew coffee and is in the
energy saving mode for steam.
26.
CONFIRMED
EXIT
PRODUCT.
EXIT
and push the Rotary Dial:
1 ESPRESSO
NO)
1)

then
and push
OK.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Impressa s9 one touch

Table of Contents