Coding Parking Aid Control Unit J446; Adjust Optical Display - Volkswagen Golf Variant 2007 Workshop Manual

– Detach the three connectors -arrows- and remove the parking
aid control unit -J446- -1- upwards out of bracket.
Installing
Install in the reverse order of removal. When doing this, note the
following:
– Tighten bolt of parking aid control unit -J446- to 1.5 Nm.
14.7 Coding parking aid control unit -J446-
Special tools and workshop equipment required
♦ Vehicle diagnosis, testing and information system -VAS
5051B-
Procedure
– Connect vehicle diagnosis, testing and information system -
VAS 5051B- .
– In vehicle diagnosis, testing and information system -VAS
5051B- , select „Guided fault finding".
– Using button, select „Functions/component" and the fol‐
GoTo
lowing menu options in succession:
♦ Body
♦ General body repairs
♦ Parking aid
♦ Parking aid functions
♦ Coding parking aid
14.8

Adjust optical display

Special tools and workshop equipment required
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
341
14. Parking aid