Default Values Set At Factory (Network) - Canon MG2900 Series Manual

Default Values Set at Factory (Network)

Default Values of the LAN Connection
Item
Enable/disable LAN
SSID
Communication mode
Wireless LAN security
IPv4 IP address
IPv6 IP address
Set printer name*
Enable/disable IPv6
Enable/disable WSD (WSD settings)
Timeout setting (WSD settings)
Enable/disable Bonjour (Bonjour settings) Enable
Service name (Bonjour settings)
LPR protocol setting
PictBridge communication
Wireless LAN DRX
(* The default value in this item varies by the machine.)
Default Values of the Access Point Mode
Item
SSID (access point name) XXXXXX-MG2900series
Security setting
Password
(XXXXXX is the last six digits of MAC address of the machine.)
The default
Enable
BJNPSETUP
Infrastructure
Disable
Auto setup
Auto setup
XXXXXXXXXXXX
Enable
Enable
1 minute
Canon MG2900 series
Enable
Enable
Enable
The default
WPA2-PSK (AES)
Serial number of the machine
181