Appendix; Shift Functions - Yamaha CP4 Stage Owner's Manual

Appendix

Shift Functions

The following table describes the functions that can be executed by pressing buttons from the stage piano's control
panel with the [SHIFT] button held down.
Action
[SHIFT] + [SLIDER FUNCTION]
[SHIFT] + [METRONOME]
[SHIFT] + [CHORUS]
[SHIFT] + [REVERB]
[SHIFT] + [MASTER COMP]
[SHIFT] + PART EFFECT [A]
[SHIFT] + PART EFFECT [B]
[SHIFT] + [-1/NO]/[+1/YES]
[SHIFT] + Data Dial
[SHIFT] + [PERFORMANCE
PLAY/SELECT]
[SHIFT] + [EXIT]
[SHIFT] + [PANEL LOCK]
[SHIFT] + [ENTER]
NOTE
• Square brackets indicate buttons from the control panel.
• The term "pressing and holding" as used above refers to pressing the button in question for at least one second.
• Control-panel buttons with a "" symbol to their bottom right support press-and-hold operations.
48
CP4 STAGE/CP40 STAGE Owner's Manual
Function
Return the Part slider's parameter assignment to Volume.
Display the pane for setting the Metronome Tempo parameter.
NOTE
You can also execute this function by pressing and holding the [METRONOME]
button.
Display the Chorus Effect screen from the Performance Common Edit area.
NOTE
You can also execute this function by pressing and holding the [CHORUS] button.
Display the Reverb Effect screen from the Performance Common Edit area.
NOTE
You can also execute this function by pressing and holding the [REVERB] button.
Display the MasterComp screen from the Utility area.
NOTE
You can also execute this function by pressing and holding the [MASTER COMP]
button.
Display the Effect-A screen from the Performance Part Edit area.
NOTE
You can also execute this function by pressing and holding the [A] PART EFFECT
button.
Display the Effect-B screen from the Performance Part Edit area.
NOTE
You can also execute this function by pressing and holding the [B] PART EFFECT
button.
Increase or decrease parameter settings in units of 10.
Change the Performance group (when on the Performance Select screen).
Press a Voice Category button to directly select the corresponding Performance
from the current group. Press [SHIFT] + [PERFORMANCE PLAY/SELECT] once
again to exit this mode.
Display the Performance screen.
Toggle the Panel Lock function on and off.
Initialize the currently selected Performance.