Dodge Charger 2011 Owner's Manual page 177

Front Heated Seat Operations — Vehicles
Equipped With Uconnect Touch™ 8.4 and 8.4 Nav:
Press the "Controls" soft-key located on the Uconnect
Touch™ display.
Press the "Driver" or "Passenger" seat soft-key
once to select HI-level heating. Press the soft-
key a second time to select LO-level heating.
Press the soft-key a third time to shut the
heating elements OFF.
NOTE: Once a heat setting is selected, heat will be felt
within two to five minutes.
When the HI-level setting is selected, the heater will
provide a boosted heat level during the first four minutes
of operation. Then, the heat output will drop to the
normal HI-level. If the HI-level setting is selected, the
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175
system will automatically switch to LO-level after a
maximum of 60 minutes of continuous operation. At that
time, the display will change from HI to LO, indicating
the change. The LO-level setting will turn OFF automati-
cally after a maximum of 45 minutes.
Vehicle Equipped With Remote Start
On models that are equipped with remote start, the
driver's heated seat can be programmed to come on
during a remote start. Refer to "Remote Starting System
— If Equipped" in "Things To Know Before Starting Your
Vehicle" for further information.
Rear Heated Seats
On some models, the two outboard seats are equipped
with heated seats. The heated seat switches for these
seats are located on the rear of the center console.
I n f o r m a t i o n P r o v i d e d b y :
3