Hama DR-20 Instruction Manual page 15

Instruction Manual for DR-20 DSL/Broadband Router
In the port menu, select Other and then USB Remote print port -> Ok. The printer server
configuration tool is displayed again, select Choose printer and click Find. Your printer is then
found. Select this printer by clicking OK-> OK-> Apply.
Note:
If your printer is not listed, either your driver is not current or your printer is not fully
supported. You can also try the installation steps described in the paragraph USB printer
installation for Windows XP/2000 without Tool.
Using an all-in-one device via the USB printer server has its limitations. The device can only
print, all other functions, such as scanning, sending faxes or similar tasks are not possible.
If the following window appears, perform the following instructions.
Click Start -> Run, enter command and press Enter. The command prompt now opens. Enter
wreset and confirm with Enter.
For Windows XP and Windows 2000:
First, install the Java software from Sun that is on the enclosed CD-ROM or can be downloaded in
the Internet at www.java.com.
09.6.2005 Art. Nr. 00049079
Seite 14