General Torque - Yamaha WaveRunner FX140 Service Manual

SPEC
Nut A Bolt B
8 mm M5
10 mm M6
12 mm M8
14 mm M10
17 mm M12
TIGHTENING TORQUES

General torque

specifications
N•m kgf•m ft•lb
5.0 0.5 3.6
8.0 0.8 5.8
18 1.8 13
36 3.6 25
43 4.3 31
GENERAL TORQUE
This chart specifies tightening torques for stan-
dard fasteners with a standard ISO thread
pitch. Tightening torque specifications for spe-
cial components or assemblies are provided in
applicable sections of this manual. To avoid
warpage, tighten multi-fastener assemblies in
a crisscross fashion and progressive stages
until the specified tightening torque is reached.
Unless otherwise specified, tightening torque
specifications require clean, dry threads.
Components should be at room temperature.
2-17
E