Removing The Radio From The Mounting Frame; External Speaker Installation - Motorola Radius CM200 Installation Manual

Installation Options
5.1.3

Removing the Radio from the Mounting Frame

1. Push the two demounting tools through the openings in the mounting frame until the two springs
release the radio.
2. Slide out the radio.
NOTE 1. The fixing tabs should be checked for tightness each time the radio is removed.
The tabs are easily tightened by twisting a large flat-bladed screwdriver in the slot
behind the tabs.
2. The mounting frame is not designed for regular mounting and demounting.
5.2

External Speaker Installation

1. Remove the speaker from the trunnion bracket by loosening the two wing screws.
2. Choose a place to mount the speaker.
3. Use the trunnion bracket as a template to mark the locations of the three mounting holes.
4. Centerpunch and drill a 5/32-inch (4 mm) diameter hole at each location.
5. Mount the trunnion bracket with the screws supplied. (See Figure 5-2.)
6. Insert the speaker into the trunnion bracket and tighten the two wing screws.
7. Insert the external speaker accessory plug into the accessory connector of the radio.
Figure 5-2. Mounting the Speaker Under the Dashboard
Dashboard
Firewall
Console or Floor
Dashboard
0.157'' (0.399cm)
Diameter
Firewall
Trunnion Bracket
Trunnion
To
Bracket
Firewall
Mounting
or
10-16 x 5/8''
Self-Tapping
Screw
FL0830253O
11