Led Indicators - D-Link DGS-3000-10TC Hardware Installation Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide

LED Indicators

The Switch front panel presents LED indicators for Power, Console, RPS, Fan Err, and Link/Act indicators for all ports
including the Gigabit Ethernet ports.
LED
Power
Console
RPS
Fan Err
Link/Act LEDs
Figure 1-4 LED indicators for the DGS-3000-10TC
Figure 1-5 LED indicators for the DGS-3000-24TC
Figure 1-6 LED indicators for the DGS-3000-26TC
Description
This LED lights green after powering the Switch on to indicate the ready state of the
device. The indicator is dark when the Switch is no longer receiving power (i.e. powered
off).
This LED blinks green during the Power-On Self Test (POST). When the POST is
finished, the LED goes dark. The indicator lights steady green when a user is logged in
through the console port.
This LED lights green if the Redundant Power Supply (RPS) is connected, the RPS
switch is turned on. If the indicator is off, the RPS is not connected or the RPS switch is
turned off.
This LED blinks red when any of the fans has failed. No light indicates all fans are
working normally.
The Switch has LED indicators for Link and Activity.
5