Swingarm And Brace - Buell Ulysses 2006 Service Manual

HOME

SWINGARM AND BRACE

GENERAL
The swingarm also serves as the oil tank. For information on
the swingarm function as the oil tank, see
TEM.
The swingarm features a removable brace on the right side to
allow drive belt replacement.
REMOVAL
Brace
NOTE
Before removing swingarm brace, always relieve belt tension
first. Removing swingarm brace without releasing tension will
cause swingarm brace damage.
1. See Figure 2-84. Loosen rear axle pinch fastener (2).
2. Loosen rear axle (1) approximately 15 rotations to allow
partial tension to be removed from rear drive system.
3. Remove right side rider/passenger footpeg heel guard
and mount with the rider and passenger footpegs. See
2.34 HEEL GUARD AND FOOTPEG
1. Fender/upper belt guard
2. Fender/upper belt guard fasteners
3. Lower stone guard
4. Lower belt guard
5. Lower belt guard fasteners
6. Sprocket cover
7. Lower stone guard fastener
5
2-58 2006 Buell Ulysses: Chassis
3.14 OILING SYS-
1.
2.
4.
5.
MOUNTS.
2
7
4
7
4
Figure 2-85. Belt Guard Assembly
8420
1
Axle
Pinch bolt fastener
Figure 2-84. Rear Wheel Mounting, Right Side
See Figure 2-86. Remove swingarm brace mounting fas-
teners (10).
Remove swingarm brace (11).
1
6
3
2.19
2
b1217x1x