Electronic Vehicle Information Center (Evic); Universal Garage Door Opener - Dodge Grand Caravan User Manual

ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)

• Press and release the Compass/Temperature
Compass/Temperature screens.
• Press the RESET
UNIVERSAL GARAGE DOOR OPENER (HomeLink
• Park your vehicle outside of the garage and turn the ignition switch to the ON/RUN
position.
• Place the hand-held transmitter 1 to 3 in (3 to 8 cm) from the HomeLink
while keeping the indicator light in view.
• Simultaneously, press and hold both the chosen HomeLink
hand-held transmitter button until the HomeLink
slow to a rapidly blinking light, then release both the HomeLink
transmitter buttons. This may take up to 30 seconds, or longer in rare cases.
• Press and hold the just-programmed HomeLink
constantly, programming is complete and the garage door should open.
button to RESET Trip Functions and change Personal Settings.
ELECTRONICS
• The EVIC features a driver interactive
display that is located in the instrument
cluster. Pressing the controls on the
steering wheel allows the driver to select
vehicle information and Personal Settings.
For additional information, refer to
Programmable Features in this guide.
• Press and release the MENU
the mode displayed will change between
Compass/Temperature, Trip, System Status,
and Personal settings.
• Press the STEP
sub menus (i.e., Trip Functions, Avg. Fuel
Economy, DTE, Elapsed Time, and Units).
button for instant access to the
Programming HomeLink
Begin Programming
®
• The HomeLink buttons are located in the
overhead console.
• Erase all channels before you begin
programming by holding the two outside
buttons for up to 20 seconds until the red
indicator flashes.
®
®
indicator flash rate changes from a
®
button; if the indicator light stays on
43
button and
button to scroll through
®
)
®
®
buttons
button and the
®
and the hand-held