Toyota 2007 YARIS HATCHBACK Owner's Manual page 540

05 12.06
—Loosening wheel nuts
PS41508
4. Loosen all the wheel nuts.
Always loosen the wheel nuts before
raising the vehicle.
The nuts turn counterclockwise to
loosen. To get maximum leverage, fit
the wrench to the nut so that the han-
dle is on the right side, as shown
above. Grasp the wrench near the
end of the handle and pull up on the
handle. Be careful that the wrench
does not slip off the nut.
Do not remove the nuts yet—just un-
screw them about one−half turn.
224
CAUTION
Never use oil or grease on the
bolts or nuts. The nuts may loos-
en and the wheels may fall off,
which could cause a serious ac-
cident.
—Positioning the jack
US41011
5. Position the jack at the correct
jack point as shown.
Make sure the jack is positioned on
a level and solid place.
2007 YARIS S/D from Jan. '06 Prod. (OM52646U)