Removing Sun Gear Shaft; Removing Center Support Bolt; Checking Rear Unit End Play; Removing Center Support To Case Snap Ring - Pontiac Grand Prix Service Manual

7E-18
1969
PONTIAC SERVICE MANUAL
Fig. 7E-41 Removing Sun Gear Shaft
Fig. 7E-43 Removing Center Support Bolt
16. Remove output shaft to case thrust washer from
rear of output shaft or from inside of case.
17. Place gear unit assembly, with output shaft facing
down, in hole in work bench or Holding Fixtures J 6116
and J 21364.
18. Remove rear unit selective washer from transmis-
sion case (Fig.
7E-47).
19. Remove rear band assembly (Fig. 7E-48).
DIAL INDICATOR
1
I
Fig. 7E-44 Removing Intermediate Clutch Backing
Plate and Clutch Plates
Fig. 7E-42 Checking Rear Unit End Play
Fig. 7E-45 Removing Center Support to Case Snap
Ring