Key To Symbols - Jonsered CS 2147 Operator's Manual

Key to symbols

WARNING! Chain saws can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others.
Please read the operator's manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with applicable
EC directives.
Noise emission to the environment according
to the European Community's Directive. The
machine's emission is specified in chapter
Technical data and on label.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
Refuelling.
Filling with oil and adjusting oil flow.
If your machine bears this symbol it is
equipped with carburettor heating.
2 –
English
KEY TO SYMBOLS
If your machine bears this symbol it is
equipped with a catalytic converter.
Other symbols/decals on the machine
refer to special certification
requirements for certain markets.