Key To Symbols Symbols On The Machine; Symbols In The Operator's Manual - Jonsered CS 2125T Operator's Manual

Symbols on the machine:
WARNING! Chain saws can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in chapter Technical data and on
label.
Never let the guide bar tip come in
contact with any object.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
This saw should only be used by
persons who are specially trained
in tree maintenance work. See
operator's manual!
Chain brake, activated (right)
Chain brake, not activated (left)
Refuelling.
Adjustment of the oil pump.
Chain oil fill.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
116 – English
KEY TO SYMBOLS
Symbols in the operator's
manual:
Switch off the engine by moving the stop
switch to the STOP position before
carrying out any checks or
maintenance.
Working position.
Choke.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.