Sewing Fixed Stitches - Brother T-8421C Instruction Manual

5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS)

5-4. Sewing fixed stitches

2912M
1
Setting the number of fixed stitches
2
3
<Automatic thread trimming (models with thread trimmer) >
Press the thread trimming key to turn on the thread trimming function. When the treadle is
continuously depressed, thread trimming is carried out after the fixed stitches have been sewn.
<Automatic sewing>
When the AUTO key is pressed to turn on the automatic sewing function, the fixed stitches are sewn
simply by depressing the treadle once without needing to depress it continuously.
<Start and end backtack sewing>
• The start backtack key and end backtack key can be pressed to turn on the backtack sewing
function.
• If changing the number of end backtack stitches in C and D, press the fixed stitch key to
temporarily turn off the fixed stitch function before making the change. (The CD display will show
the number of stitches and the setting can then be changed.)
31
After the set number of stitches in E (fixed stitches) have been sewn, the sewing machine
stops in the needle position that has been set by the needle up/down key (refer to p. 34).
After this, normal sewing is carried out if the treadle is depressed.
After the thread is trimmed (models with thread trimmer), fixed stitch sewing mode is enabled.
T-8421C, 8422C, 8452C, 8722C, 8752C
Example:
From 0 to 1999 stitches can be set.
4178M
2159M
2160M