Creative NOMAD II User Manual page 19

&RQQHFWLQJ
WKH 120$'
3OD\HU WR D
&RPSXWHU
You may leave your
computer running while
connecting the NOMAD II
Player to the USB port.
The Player's USB connector
is protected by a rubber flap.
Pull the flap out of the
connector to insert the jack.
To download or upload files between the NOMAD II Player and your computer, the
Player must be connected to the computer via the USB port.
To connect the NOMAD II Player to your computer:
1. Check that the battery is properly installed in the Player.
2. Position the computer so that you can easily reach the USB port.
Note: The USB port may be located on your computer's front panel instead of
the rear as shown.
3. Using the USB cable included with the Player, connect the rectangular connector to the USB connector on
your computer.
4. Connect the square connector to NOMAD II Player. When the cable is properly connected and the computer
is running, the Player LCD displays a connection diagram.
Setting Up NOMAD II Player 8