Wheels/Tires - KYMCO MXU 300 User Manual

3
. INSPECTION/ADJUSTMENT
• Be sure that both tie-rod are turned the
same amount. If not, the machine will
drift tight or left even though the
handlebar is positioned straight which
may lead to mishandling and accident.
• After setting the toe-in to specification,
run the machine slowly for some
distance with hands placed lightly on
the handlebar and check that the
handlebar responds correctly. If not,
turn either the right or left tie-rod
within the toe-in specification.

WHEELS/TIRES

Check the tires for cuts, imbedded nails or
other damages.
Check the tire pressure.
Tire pressure should be checked when
tires are cold.
TIRE PRESSURE
Front 0.28 kgf/cm² (28 Kpa, 3.2 psi)
Rear 0.28 kgf/cm² (28 Kpa, 3.2 psi)
TIRE SIZE
Front : 22*7-10
Rear : 22*10-10
Check the front axle nut for looseness.
3-19
1 Rider
Tie-rod End Nuts
Front Axle Nut
MXU 300/250
Tie-rod