Introduction; Disassembly And Reassembly; Tools Used - Citizen PMU-2200II Service Manual

INTRODUCTION

This manual describes the disassembly, reassembly, and maintenance procedures of the KIOSK printer
PMU2XXX

1. DISASSEMBLY AND REASSEMBLY

Notes the following items when maintaining the printer.
• Do not disassemble, reassemble, or adjust the printer unnecessarily when the printer operation is
satisfactory.
• Do not loosen the screws fixing each component carelessly.
• After finishing inspection, perform checking for normality before turning on the printer.
• Pay attention not to leave the part or screws used for maintenance inside the printer.
• When handling the print head and electronic components, pay attention to static electricity.
• When disassembling or reassembling the printer, check the wiring and cord for damage. Pay attention not
to lay the wiring and cord by force.
• Lubricate the components as necessary when reassembling them.
1.1

Tools Used

• Phillips screwdriver #0, #1, and #2
• Tweezers
• Long-nose pliers
• Nipper
PMU2200Ⅱ/2300ⅡSERIES Service Manual
-3-