Software Status; Basic; Dhcp - D-Link DCM-604 Series User Manual

DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor
User's Manual

5.2.1 Software Status

The Software page shows how long the DCM-604 has operated since last being powered
up, and some key information the DCM-604 received during the initialization process with
your cable service provider.
If Network Access shows "Allowed," then your cable service provider has configured
the DCM-604 to have Internet connectivity. If Network Access shows otherwise, you
may not have Internet access, and please contact your cable service provider for
assistance.
5.3

Basic

The Basic page contains the basic features of DCM-604 including Setup, DHCP and
Backup

5.3.1 DHCP

The DHCP page allows you to activate/deactivate the DHCP server function of the DCM-
604, and, if the DHCP server is activated, to see DHCP leases it has provided.
With this function activated, your cable service provider's DHCP server provides one IP
address for the DCM-604, and the DCM-604's DHCP server provides IP addresses,
starting at the address you set in Starting Local Address field, to your PCs. A DHCP
server leases an IP address with an expiration time.
To set the maximum number of PCs to which the DCM-604 will issue IP addresses, enter
it in the Number of CPEs box and then click Apply. (CPE is another term sometimes
used for PC.)
12