Share Video - Nokia N93 User Manual

Hide thumbs Also See for N93:
Table of Contents

Advertisement

Available languages

Available languages

Ask your network operator or service provider for the SIP
profile settings, and save them in your device. Your network
operator or service provider may send you the settings over
the air.
If you know a recipient's SIP address, you can enter it on
your contact card for that person. Open
device main menu, and open the contact card (or start a new
card for that person). Select
Enter the SIP address in the format
sip:username@domainname (you can use an IP address
instead of a domain name).
UTMS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an agreement
for you to use the UMTS network.
• Ensure that your device UMTS access point connection
settings are configured properly. For help, see
"Connection," p. 97.

Share video

To receive a sharing session, the recipient must install
Video sharing
and configure the required settings on their
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
56
Contacts
from your
Options
>
Add detail
> SIP.
To receive share invitations, you must be registered to the
service, have an active UMTS connection, and be within
the UMTS network coverage.
Live video
1 When a voice call is active, select
video
> Live.
2 The phone sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and
Select
If the SIP address of the recipient is not available, enter
a SIP address. Select
OK
3 Sharing begins automatically when the recipient
accepts the invitation.
The loudspeaker is active. You can also use a headset
to continue your voice call while you share live video.
4 Select
Pause
to pause the sharing session. Select
Continue
to resume sharing.
5 To end the sharing session, select Stop. To end the voice
call, press the end key.
Video clip
1 When a voice call is active, select
video
> Clip.
A list of video clips opens.
Options
>
Share
to send the invitation.
to send the invitation.
Options
>
Share

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

N93-1

Table of Contents