LED Indications
Indication
RUN
ALARM
Confirming the CO Line Connection
After initialization, program the PBX and connect CO lines to the PBX.
To confirm that the CO lines are successfully connected, dial [ ] [3] [7] + CO line number (3 digits) on a PT,
or press the PT's S-CO button. You will hear a dial tone if the CO line is available and connected.
Turning off the PBX
For safety reasons, make sure to turn off the power switch before unplugging the PBX. To unplug, follow the
reverse steps to plug it in.
Document Version 2010-11
Color
Description
Green
PBX status indication
•
OFF: Power off (includes normal reset)
•
ON: Power on and running (on-line)
•
Flashing (60 times per minute): Starting up
•
Flashing (120 times per minute): Starting up or resetting with:
•
the System Initialize Switch in "SYSTEM INITIALIZE" position
•
the SD Memory Card not inserted
Red
Alarm detection status indication
•
OFF: Normal
•
ON: Alarm (CPU stop, alarm for each optional service card)
•
Flashing: Alarm (MPR file error in restarting)
2.10.1 Starting the PBX
Installation Manual
113