Fringing - Bernina virtuosa 153 QE Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Select stitch #2 - SW 2mm and SL satin - Tension 1 - Tailor Tack Foot #7.
• Put a contrast all-purpose sewing thread in the bobbin.
• Turn under ½" seam allowance on both pieces of fabric and press.
• Butt the folds together under the center of the presser foot, with right sides up.
• Guide fabric while sewing, so needle swings pierce both fabric pieces.
• Carefully remove the bobbin thread and gently separate the two fabrics, leaving them joined
by strands of the upper thread.
• Change to Embroidery Foot #6 and one of the following stitches:
- Stitch #35 on the 163 - SW about 4mm or
- Stitch #18 on the 153QE - adjust width as desired
• Engage the Mirror Image function, if needed.
• Anchor the fringe to the fabric edge by oversewing it.
• After fringe is secured on one side, the other fabric can be pulled away.
• Trim excess seam allowance from wrong side if needed.
BERNINA
M Y
ASTERING OUR
BERNINA
163 - Satin Stitch Triangle #35

FRINGING

Fabric:
Needle:
Thread:
Presser Feet:
1/04/02
®
®
virtuosa 153 QE/163
153QE - Blanket stitch #18
Firm fabric - 2 pieces, 4" x 6" each
90/14 Embroidery
Rayon Embroidery
Tailor Tack Foot #7 (optional accessory)
Embroidery Foot #6 (optional accessory)
virtuosa 153 QE/163/74