Table of Contents
Advertisement
5. Screen Settings
The settings may be left unchanged if no special needs are required. The display
layout may be changed at any time using the Layout button on the remote control.
6. Software Options
To activate options for the system, a new option key must be entered in the Software
Options menu (see paperwork accompanying the system). The Presenter option key
should be entered under "New Option Key". Any bandwidth option key should be
entered under "New Bandwidth Key". For more information on these options, please
contact your TANDBERG representative.
7. Date and Time Settings
Select your preferred Date and Time Settings.
8. Save changes
Remember to save any changes made in a menu by selecting the Save button on the
menu line and pressing OK.
Network configuration:
1. Open the Network menu
Press OK/Menu to open the Main Menu, if not already displayed. Select Control
Panel - Administrator Settings - Network to open the Network menu.
2. ISDN configuration
Set the Network type to the desired network. Specify the settings for the selected
network in the relevant menu. For details, follow the instructions in
Settings. See also the examples in
Switched 56 network
network
adapters.
3. LAN configuration
Select LAN Settings in the Network menu and specify the necessary LAN settings
according to the instructions from your LAN administrator. For details, follow the
instructions in
refer to
H.323 Settings
4. Network Profiles
Please refer to
5. Data Port
Please refer to Data Port for details
Appendix 9: Connecting the system to the
and in
Appendix 10: Connecting the system to ISDN using NT1
Settings. If there is an H.323 Gatekeeper present on your LAN,
LAN
as well.
Network Profiles
for details
Installation
ISDN-BRI
13
Advertisement
Table of Contents
