Picture no: 17289t.tif
10. Insert the bulb housing in the body,
engaging the lug and the ball pin in the
recesses. Tighten the fastening nuts
using a wheel bolt wrench 3. Attach the
plug connector. Close and engage the
flap.
11. Carry out the following steps to ensure
proper function of the tail lamps:
–
Switch on ignition.
–
Operate brake.
–
Switch on parking lamps.
Picture no: 17293t.tif
Estate, Delivery Van
1. Disengage cover by pressing retaining
lugs and remove.
Self-help, vehicle care
Picture no: 17294t.tif
2. Detach plug connector from bulb holder.
3. Hold the outside of the bulb housing,
unscrew the three fastening nuts and
remove the bulb housing rearwards.
265