Opel Astra Owner's Manual page 124

120 Instruments, controls
8:56 5
07.05.2008
Picture no: 17024t.tif
Triple information display
Set date and time
The infotainment system 3 must be off. To
access setting mode, press the Ö button for
approx. 2 seconds. The flashing value can
be set using the ; button. Use the Ö button
to switch to the next unit and to exit setting
mode.
Correcting time 3
The RDS signal of most VHF transmitters
automatically sets time. This can be
identified by } in the display.
,5
°C
Some transmitters do not send a correct
time signal. In such cases, switch off
automatic time synchronisation.
Access setting mode and go to setting of
year. Hold the Ö button depressed for
approx. 3 seconds until } flashes in the
display and "RDS TIME" appears. Activate
(RDS TIME 1) or deactivate (RDS TIME 0)
the function using the ; button. Exit setting
mode with the Ö button.
11:25 21
}
Range
257km
Picture no: 17337t.tif
Board information display
Selecting functions
Functions and settings of some
equipment 3 can be accessed via the
board information display.
This is done using the menus and buttons
of the infotainment system 3.
Menus are exiting automatically after
approx. 5 seconds of inactivity.
.5
°C
,
3